Installation & service

How do I know if my facility is suitable for the Dyson Airblade™ hand dryer?

We recommend you carry out a simple site survey to ensure your facility is suitable. Ask yourself these questions:

1. A Dyson Airblade™ hand dryer measures AB02 64.1cm x 30.22cm x 24.89cm AB04 66.67 cm x 30.22 cm x 24.63 cm and requires 50mm clearance on either side. Is there sufficient room for it?
2. Is the location free of obstructions such as opening doors to allow easy access to the Dyson Airblade™ hand dryer?
3. The product will be mounted at between 800mm to 1m height and needs at least 210 mm of clearance underneath – will there be sufficient clear space underneath?
4. Are the wall surfaces flat and able to bear loads of up to 16kg?

Back to top

How much wall space does the Dyson Airblade™ hand dryer require?

A Dyson Airblade™ hand dryer measures AB02 64.1cm x 30.22cm x 24.89cm AB04 66.67 cm x 30.22 cm x 24.63 cm and requires 50mm clearance on either side. Is there sufficient room for it?

Back to top

What type of wall surface does the Dyson Airblade™ hand dryer require?

The Dyson Airblade™ hand dryer must be mounted on walls which are flat and structurally suitable for the weight and size of a Dyson Airblade™ hand dryer. It is not recommended that the Dyson Airblade™ hand dryer is positioned on weak plasterboard walls.

Back to top

How much does the Dyson Airblade™ hand dryer weigh?

Dyson Airblade™ hand dryer AB02 weighs 14.5kg. The boxed weight of the AB02 is 17.5kg. AB04 weighs 9.95kg. The boxed weight is 13 kg.

Back to top

What are the electrical requirements?

Check that the electrical supply corresponds to that shown on the rating plate before attempting installation.

Electrical supply characteristics: 120 V, 60 Hz AC. Rated operating electrical load: 1400 W.

The electrical supply intended for use with the Dyson Airblade™ hand dryer should provide all-pole disconnection under over-voltage category III conditions in accordance with UK IEE regulations or equivalent local codes or regulations.

A dedicated switched fuse spur should be used for installation of each Dyson Airblade™ hand dryer.

The Dyson Airblade™ hand dryer should be connected to the electricity supply using flexible round PVC insulated three core cable with a conductor cross sectional area of 1.5mm2. Do not use any other size of cable. All wiring used must be in accordance with the current IEE regulations or equivalent local codes or regulations.

The Dyson Airblade™ hand dryer must be earthed.

Back to top

How do I arrange a Dyson Airblade™ hand dryer installation?

To buy a Dyson Airblade™ hand dryer and arrange installation, call our Helpline on 1-877-397-6622. After accepting your order, we will call you back to arrange a date that's suitable for you.

Back to top

How long will my Dyson Airblade™ hand dryer order take to arrive?

After accepting your order, our delivery team will contact you to arrange a suitable delivery date. We aim to dispatch your order within 3 working days.

Back to top